Search

Search

-10%

36 Volt #70 Series Continuous Duty Solenoid Relay with Resistor & Diode Kit Compatible with EZGO Golf Cart, 4 Terminal SPNO Continuous Duty Replaces# 27855G01 11761G1 27855G02 31680G1 3016

KWD 8
Brand
Jepacr
Weight
365 g
– 1 +

Special Features

  • 【Fitment】: for Ezgo Txt Series and for All 1986-current E-Z-GO 36 Volt Electric Vehicles, for Yamaha's Electric G2 Model only, Safety measures must be observed in installation. You must take off the negative cable connection loose between the battery and the controller switch to interrupt the electric flow.
  • 【OEM Part Number】: 70-120224, 3016, 11761-G1, 27855-G01, 27855-G02, 31680-G1, Cole Hersee 24080, E-Z-Go 11761GA. Solenoid Resistor Replaces OEM Part Number: 21764-G1, Solenoid Diode Replaces OEM Part Number: 30353-G1
  • 【Features】: 4 terminal design #70 series, short housing, copper contacts, an important part of the golf cart, solenoids are needed to power the starter. The resistance is 18Ω, the maximum instantaneous current can reach 200A, but the continuous operating current is recommended to be less than 80A.
  • Fits For Columbia Par Car 71468-85, Melex 300668, Legend 7-3668, Pargo 318 3016 8427, Karrior 704-00, Otis A-11004, Shuttlecraft 95-0079, and more.
  • 【Warning】: This is a start solenoid only finish work when your key start, if be Continuous Duty,can work 5 minutes under 150Amp, but NEED BREAK otherwise will be too hot to burned or fired

Description

Voltage 36 Volt,4 terminal Heavy-duty Solenoid with Copper Contacts,Flat Mounting Bracket/ Apply for Ezgo Txt Series and for All 1986-current E-Z-GO 36 Volt Electric Vehicles, for Yamaha's Electric G2 Model only

Replaces OEM Part #'s: 70-120224, 3016, 11761-G1, 27855-G01, 27855-G02, 31680-G1,Cole Hersee 24080, E-Z-Go 11761GA Solenoid Resistor Replaces OEM Part Number:21764-G1；Solenoid Diode Replaces OEM Part Number:30353-G1

Resistance is 18Ω,Max Transient current can be 200A, but Continuous Working Current recommend 80amp/ Dimensions : 2) 5/16-24 Contact Terms/ 2) 10-32 Terminal/ Mounting holes: 5/16 x 19/32, 2-13/64 on centers

Acts as the conduit between the golf car battery and starter generator, Copper alloy contact terminals Insulated base w/ steel housing / MAKE SURE YOUR SMALL DIODE IS IN THE CORRECT DIRECTION WITH THE LINE POINTING TO THE POSITIVE SIDE.

WARNING: This is a start solenoid only finish work when your key start, if be Continuous Duty,can work 5 minutes under 150Amp, but NEED BREAK otherwise will be too hot to burned or fired

Package includes: 1*36 volt continuous working solenoid, 1*solenoid resistor, 1*solenoid diode.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}