Pinless Wood Moisture Meter,Moisture Meter for Wall,Water Leak Detector with Sound Alarm,Digital Moisture Reader for Lumber,Firewood,Woodworking,Concrete Building(Pinless color screen)

✅➜Tips 1: The pinless moisture meter is penetrates up to 0.75inches deep, so wetter materials located below your subject material can also influence the readings, as can metal nails, workbench, your hand, etc.
✅Instant and Precise Readings: It reads to a depth of approximately 19mm into the slab. Plus, the current reading can be captured via the hold function.
✅Four Measurements:Easily set the wood species you need to measure. Offers a Relative (comparative) measurements.
✘It reads 0-5% on pure drywall(gypsum panel) -You are unrecommened to make test on pure drywall, because the density of the pure drywall is too low to register a reading.(the actual readings will vary based on humidity and density of the material).
✅How to Calibrate at the factory: press and hold for 5 seconds on ‘HOLD' button to reset the factory.
✅➜Tips 2: Wipe measured material surface dry and neat for best results. In addition, the measured material (walls, masonry and wood) being measured is not stacked or sitting on wetter materials.
✅➜Tips 3: The pinless moisture meter readings can be influenced by nearby metal, or your own fingers. Keep fingers on the green-rubber grips, well clear of pad scanning area.
✅【Why Choose Us】 We offer factory-direct sales. We provide 24/7 service and assist you with any issues you may encounter during use.

Hello,