APPLICATION: Test Clamp Model SDK08, 40V, 2A current, for SOIC/TSSOP/TSOP/SSOP/MSOP/PLCC/QFP/TQFP/LQFP/SMD IC test chip.
SIMPLE OPERATION: If you can't clamp the chip pins, use tweezers to adjust the front of the clamp so that the angle is close to 90 degrees, simple operation.
HOLDING METHOD: SKD08 test clips are used for chips with a pitch greater than 0.3mm, the holding method for small chip pins is to gently shake your hand and gently push down.
HIGH RELIABILITY: SMD chip foot clip is made of ABS and metal, high performance and high reliability, has passed the test standard.
PLEASE NOTE: After use, do not force the clamp to remove it from the chip pins, push the clamp out and gently remove it from the chip pins.
Siglent Technologies SSA3021X Spectrum Analyzers,9 kHz to 2.1 GHz with Free Tracking Generator
KWD 467.500
Hantek 6074BC 4-CH Oscilloscope 70Mhz 1GSa 23-pc Set
KWD 87
EspoTek Labrador: Easy-to-Use, Open-Source, All-in-One USB Oscilloscope, Signal Generator, Power Supply, Logic Analyzer, Multimeter for Windows, Mac, Linux, Android, Raspberry Pi
KWD 12
Faraday Protection Cloth-Pure Copper Fabric Shielding EMI RF on Low and High Frequencies 10 Meters Long
KWD 59.500
