Size - Diameter: 2.3mm / 0.091"; length: 100mm / 4"; finish: polished. (There may be warping deformation, but it will not have any impact on the use. Not recommended for use in working environments with high coaxiality requirements.)
Material - High speed steel tools provide high hardness, good toughness, and wear resistance, good for most general purpose applications.
Feature - Smooth surface, easy to form, no cracks formed. The round bar stock enables precise and accurate machining operations. Its uniform composition and fine grain structure ensure consistent performance and dimensional stability.
Applications - Round rods can be used in a variety of applications including turning, facing, drilling and threading. Widely used in processing milling cutters, gravers, punch needles, bearing sleeve rods, high-hard ejector pins, center pins, etc.
Note - Apply appropriate lubrication or cutting fluid to the cutting area to improve performance, prevent overheating and extend tool life. Add some oil when storing, and reduce contact with air or do not expose it to air to prevent rust.
uxcell 10PCS Hardware High Speed Steel Lathe Round Bar Stock Shaft 100mmx1mm
KWD 4.500
HARFINGTON 10pcs 5/16" Precision Solid Copper Bearing Balls for Bearings Valves Decoration
KWD 3
HARFINGTON 20pcs 5/16" Precision Solid Copper Bearing Balls for Bearings Valves Decoration
KWD 3.500
HARFINGTON 150pcs 1.8mm Precision Solid Brass Bearing Balls for Bearings Valves Decoration
KWD 4
