AUTOMATIC SAVE FUNCTION - Once the settings are changed, the data is automatically saved every 5 seconds. When the data is saved, the data will remain off and the data will be saved multiple times because the factory data will be saved for the first time. Power or other settings and operations! If you change the power immediately after the change, the changed data will not be saved.
ULTRA-SMALL STEREO LEVEL LIGHT - Adjusts the light bar rise, descent speed and lamp stop time. Users can freely adjust the main top of each light bar and actual light speed, which is most suitable for their own display. Each lamp is equipped with an independent current limiting resistor to ensure the same brightness of different color lights. The signal input is isolated by the op amp to avoid single-chip high-frequency interference AUDIO.
DISPLAY EFFECT - 1. Strip Show+ After Top Travel Whereabouts; 2. Strip Show After+ The Disappearance Of The Top Travel; 3. The Strip Display + (No Top Display); 4. Strip Show+ Right After The Top Flow Disappears; 5. The Strip Display + (Three Lights); 6. Striped Marquee Display + Top Effect; 7. Top+ Strip Show Right Jump Lamp Lights Two Bits Whereabouts.
PERFECT MATCH - Audio input is isolated by TI signal to minimize monolithic high frequency interference in series audio circuits. Different colors of light provide separate current limiting resistors. Guarantee perfect match. This level lamp Have standard display mode and Wide range of automatic gain control(AGC)Mode. Rich in functions.
STATEMENT - The V1.2 version software adjusts the previous real-time mode to a professional DB mode, which can be installed in professional related equipment for signal monitoring purposes. The audio amplitude range is -40dB to +9dB, which has professional reference significance. For some users that the level of light sensitivity, please complete the user welding test the first thing must press the button for 10 seconds to restore a factory settings!
FainWan ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 Module with PCB 5V/3.3V STM32 with Touch
KWD 9.500
uxcell 15pcs 3mm 940nm Infrared Receiver Diode DC 1.2V LED IR Receiver Light Emitting Diodes Black Round Head
KWD 3
QCCAN 3PCS MAX7219 8x8 Dot Matrix Module LED Display Modules MCU LED Display Single-Chip Control Module DIY Kit with 5pin Wires
KWD 4.500
4-Digit 7-Segment LED Display Clock Module with TM1637 IC Compatible with Raspberry Pi (Blue LEDs)
KWD 2.500
