Specification:
Material: carbon steel
Surface treatment: white galvanized
Round head: 12mm/0.47 inches
Diameter: 6mm/1/4 inch
Total length: 40mm/1.57 inches
Each pin can be immediately inserted without the need for tools or complex settings. Simply insert the smaller end into the alignment hole of the tray frame, and gravity can complete the rest and fix it in place, resulting in lower maintenance costs.
The hanging pin reduces the risk of accidental disconnection of the beam. If the forklift operator lifts the pallet too high, the pallet (or fork) may push the crossbeam upwards, causing it to break from the frame and cause the pallet to fall from a high position. The safety bolts provide a secure connection from the tray frame crossbeam to the upright frame and help support the tray frame and shelf unit. Immediately add heavy steel bars with standard or teardrop-aligned holes.
Insertion installation: The pin is installed on the side of the beam end plate and connected through a punch on the side of the frame to fix the beam in place and prevent accidental disconnection. Each pin can be immediately inserted without the use of tools or complex settings. Simply insert the smaller end into the alignment hole of the tray frame, and the rest is done by gravity and secured in place with low maintenance. Our pins are compatible with most types of standard selective tear holder systems.