Related Items

---

• waveshare 7.5inch E-Ink Raw Display Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 800×480 Resolution with SPI Interface Without PCB KWD 19
• HCJYC Protection Case for Flipper Zero Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board - Black KWD 12.500
• 2-Channel Isolated RS232 Expansion HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W, SC16IS752+SP3232 Dual Chip Convert SPI to RS232 Data Rate up to 921600bps Embed Multi Protection Circuits KWD 9
• HCJYC Protection Case for Flipper Zero Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board - Transparent Set KWD 12.500
• Google Coral Environmental Sensor Board KWD 10
• Acxico 1Pcs Full Color RGB LED Strip Driver Module Shield for Arduino UNO R3 STM32 AVR V1.0 for 5V MCU System KWD 4
• 5 in 1 Protective Case for Flipper Zero & for The Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board with GPIO Dust Plug - Black and Green Set KWD 16.500
• All in One - Protective Case Set for Flipper Zero & for Wi-Fi Dev Board V1 ESP32-S2, The Most Complete Ultimate Starter Kit Accessories for Flipper Zero - Green KWD 20.500
• 3 in 1 Protection Case Set for Flipper Zero & for The Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero & WiFi Dev Board - Clear WiFi Case with Blue Soft Case Set KWD 16.500
• 1.54 Inch E-Paper Screen Display Module Resolution 200x200 3.3v E-Ink Electronic Display with Embedded Controller SPI Interface Support Partial Refresh for Raspberry Pi/Arduino/Nucleo/Jetson Nano KWD 7.500
• USB Breakout Board 8 in 1 Type A 3.0 Male to Mini Type-C Micro Type-B Female Converter Board KWD 5.500
• SparkFun Pro Mini ATmega328-5V/16MHz Development board Compatible with Arduino boards and IDE KWD 4.500
• waveshare Three Color 2.13inch E-ink Display HAT (B), 212x104 Resolution 3.3V/5V Red Black White E-paper Display Screen for Raspberry Zero/Zero W/Zero WH/2B/3B/3B+ SPI Interface,Full Refresh KWD 9
• 3pcs ESP32 S2 Mini V1.0.0 WiFi Board Based ESP32-S2FN4R2 ESP32-S2 4MB Flash 2MB PSRAM Type-C USB Connect Mini Module for MicroPython KWD 7
• PCIe to M.2 Adapter for Raspberry Pi 5, Mini Compact Size, Support SSD 2230/2242 M.2 Solid State Drive, Gen2 and Gen3 Modes, Support Booting Pi5 from Solid State Drive, Pi 5 M.2 HAT HAT+ Standard KWD 5.500
• ESP32-LyraT-Mini Development Board KWD 9.500
• Protection Case for Flipper Zero Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board - Orange KWD 8.500
• 3-in-1 Set - GNSS Module Receiver with 2 Pack of Prototyping Boards for Flipper Zero Comes with Silicone Protective Case - Supports GPS, BeiDou (BDS), GLONASS and QZSS Systems KWD 8.500
• 5PCS RFID Kit Mifare RC522 Reader Module RF IC Card Sensor Module with S50 White Card+Key Ring KWD 5
• 4 in 1 Protective Case for Flipper Zero Device and Wi-Fi Dev Board V1 ESP32-S2, Cover Set Accessories for Flipper Zero WiFi Dev Board - Black & Transparent KWD 12.500
• 5 in 1 Protective Case for Flipper Zero & for The Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board with GPIO Dust Plug - Orange Set KWD 12.500
• 4 in 1 Protective Case for Flipper Zero Device and Wi-Fi Dev Board V1 ESP32-S2, Cover Set Accessories for Flipper Zero WiFi Dev Board - Black KWD 10
• Wi-Fi Devboard for Flipper Zero, 5 in 1 Wi-Fi Devboard and Accessories Set for Flipper Zero Device KWD 20.500
• Raspberry Pi 5 8GB Starter Kit | 64GB microSD | Official 27W Power Supply | Official case with Fan | 4K Micro HDMI Cable 1m | Aluminum heatsink KWD 59.500
• All in One - Protective Case Set for Flipper Zero & for Wi-Fi Dev Board V1 ESP32-S2, The Most Complete Ultimate Starter Kit Accessories for Flipper Zero - Pure Black KWD 12.500
• Protection Case for Flipper Zero Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board - Yellow & Black KWD 8.500
• Banana Pi BPI-R4 WiFi 7 Router Development Board, with MediaTek MT7988A Chip, 4GB RAM and 8G eMMC onboard, 2X 10Gbe SFP Slot,4X Gbe Network Port (with WiFi 7 and Metal Case) KWD 91
• CM5 Tablet Base Board Rich Interface, Up to 8K @60Hz, with Wi-Fi5+BT 5.0, BLE Support for Orange Pi CM5 KWD 13
• Waveshare 2PCS Raspberry-Pi-Pico-2-CC, Compatible with Raspberry Pi Pico 2 Microcontroller Board, Based On Official RP2350 Chip, Dual-Core & Dual-Architecture Design, 3 Items, 2PCS Version KWD 11.500