1. Application: This tool is designed for disassembling motor rear cover , it can remove most back covers of 280 motor, You can use this tool to replace worn motor carbon brush .
2. Use method: Firstly, use the teeth of the tool to hook the metal clip of the rear cover, keep the motor stationary. Secondly ,push the tool counterclockwise until the metal clip that fixes the back cover is opened. Remove all metal clips until you can pull the back cover out.
3. Product features: With electroplated surface, this tool makes the surface much smoother and prevent rust, The edges have been polished to protect your hand.
4. The metal clip of motor must be wider than 1.8mm, At the same time, it must also be straight to make sure the teeth of the tool hook it. Otherwise, the tool cannot be inserted into the plastic groove and bite the metal clip.
6. Attention : This tool is used to remove the back cover of the small 280 motor, which cannot be use for other models of motors
7. After sales service: 1 year warranty, 30 days free return. If you need large quantity of this product, please contact us to enjoy up to 40% discount,
Ididit Steering 2401550040 2" Polished Aluminum Chrome Swivel Ball Floor Mount
KWD 57
DASBET Universal Overhead Valve Spring Compressor | Valve Removal Installer Tool Overhead Valve Removal Installer Tool Fit for Quick Removal of Valve Springs
KWD 5.500
8MILELAKE 6pc Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller
KWD 19
Mo-Clamp 4110 Single Claw Hook
KWD 25
