A 2212 A2212 2200KV Brushless Outrunner Motor W/ Mount
KV: 2200
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3S Li-Poly 11.1V
Motor Dimensions: 27.5 x 30mm
Shaft Diameter: 3.17mm
DT-30A Brushless ESC
ATTENTION:
This ESC do not have the English instruction.
Before producing, the manufacturer have set up the program, the ESC do not need additional program.
The ESC need to be calibrated before you use
Here is the calibration steps:Turn on the remote control, adjust the throttle to the highest, power on, turn off the power after hearing the slow beep. Power on again, after the two drops are heard, the throttle is adjusted to the lowest level. After hearing the long beep, turn off the power, turn off the remote control, the ESC calibration is completed.

Pls note:Do not install propellers when you calibrate ESC, otherwise it is dangerous.