IMPORTANT: The bypass module requires a Fortin Flashlink Updater in order to program it to work in your vehicle AND IS SOLD SEPARATELY! PLEASE CHECK OUR EBAY STORE FOR OUR FORTIN BUNDLES THAT INCLUDE THE FLASHLINK! Preloaded module & T-Harness combo for select Audi vehicles. The EVO-AUDT1 is the ultimate Factory Fit, ALL-IN-ONE data immobilizer bypass, door lock, alarm & remote start interface with T-Harness combo module for select Audi vehicles. It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.**FLASHLINK Program cable required to use this as a stand alone remote starter. PRODUCT FEATURES 3 x On-board LEDs for simplified programming and diagnostics.1 x Preloaded firmware for maximum compatibility. [1]1 x Factory Fit T-Harness for easy install.1 x TB-VW 1 x 2-way datalink port for data-to-data (RS-232) communication with compatible remote-starters and security-systems. [2]1 x 20 Pin general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly. PRODUCT SPECIFICATIONS 3 x CAN-Bus controllers.3 x General purpose controllers (J1850, Class 2, encrypted key etc.).1 x On-board relay (SPDT). 1 x On-board relay (DPDT).1 x Analog controller 0-12VDC @ 20mV steps (Passlock, MUX). PARTS INCLUDED 1 x EVO-ALL control module (firmware preloaded). [1][3]1 x Warning label. [3] 1 x 4 Pin 2-way data-link harness. [2]1 x Factory Fit T-Harness (THAR-AUD1). [4]