Feature:
PEI Sheet Install: (please Cut off the extra corners by yourself） The Polyetherimide sheet comes with strong adhesive already laminated to the PEI. Apply the PEI with slight pressure and at an angle to prevent and minimize air bubbles. Once applied set the print bed to 60C and apply pressure evenly across the PEI in a sweeping fashion to firmly set the adhesive. Please use a towel to avoid getting burned. Level the bed and set the height of the nozzle before printing.

PEI Sheet Use：
Thickness: 0.17mm
Compatible with PLA PETG TPU and other most filaments,not recommand ABS.
When the print is completed, let the bed cool, and the part will be easy to release from the PEI surface. Parts are actually easier to remove if released before the bed becomes completely cold.

PEI Sheet Maintenance:
Clean in between prints with isopropyl alcohol and a lint free rag.
Acetone can be used instead of isopropyl alcohl, but the bed must be cold if acetone is used. Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life.

Sticker Base:
it is adhesive-backed for easy installation

Package Includes:
1X 160x130mm Steel Spring
1X 160x130mm PEI
1X sticker Base with adhesive