✔️ [2022 ADVANCED NANOVNA] ORIGINAL NanoVNA V2 Plus4 (S-A-A-2) is a 4GHz Transmission/Reflection vector network analyzer, measuring the S11 Reflection coefficient and the S21 Transmission coefficient of a high frequency network; Not only testing standing wave impedance of the antenna, but also can debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier
✔️ [ULTRA-WIDE FREQUENCY RANGE] Compared to the previous NanoVNAs (10KHz-1.5/3GHz), AURSINC NanoVNA V2 vector network analyzer provides a 50KHz-4GHz ultra-wide frequency range with an improved precision and accuration, Moreover, the System dynamic range for this VNA is up to 90dB dynamic range (1GHz) and up to 80dB dynamic range (3GHz); Plus4 VNA has improved shielding that achieves high dynamic range with an aluminum enclosure
✔️[UPGRADED PERFORMANCE] The scanning speed of NanoVNA V2 antenna analyzer increases by 4 times (400 points/sec) than previous V2 versions. Flip Display, for your using convenience, you can flip the display as the following steps: Menu - Display - Flip Display
✔️[SUPPORT PC CONTROL] Support PC software control, like Windows(above 7), Linux, MacOS, the VNA can be more compatible with PC and antenna measurements, when measuring the frequency. It works well with a computer to print out Standing Wave Ratios, Smith Charts and other Antenna related information over various frequency ranges
✔️ [LARGER CAPACITY RECHARGEABLE BATTERY] The upgraded vector network analyzer is contained with a 3200mAh/3.7V lithium rechargeable battery with loger operating time and lasting battery life. Also there are battery charge LED indicators at the back of the VNA which are the battery fuel gauge, the one that is closest to the CH1 port connector is the lowest charge level indicating ≤ 25%
✔️ [ORIGINAL NanoVNA V2 Plus4] AURSINC NanoVNA V2 Plus4 is the Original edition (if you buy the clone one the VNA cannot proceed the software update forM the official site) NanoVNA V2 PLUS4 v2.4 comes with a 4-piece calibration set - open, short, load, & thru, two male-male SMA cables, a USB2-B to USB2-A cable (black or silver), and a stylus to operate the touch screen menu and markers
Digital Logic Analyzer LA104 USB Mini 4 Channels 100MHz Max Sampling Rate Built in 8MB Flash Storage 2.8 Inch Oscilloscope
KWD 47.500
Portable tinysa Spectrum Analyzer - AURSINC V0.3.1 Hand Held Frequency Analyzer | 100kHz to 960MHz MF/HF/VHF UHF Input | ESD Protected Function & 2.8 inch Touchscreen | Signal Generator
KWD 26
Treedix LCR-TC1 Meter Graphical Transistor Tester 1.8 inch TFT Graphic Display Resistance Capacitance Meters Multi-Function Tester LCR/ESR/NPN/PNP/MOSFET
KWD 8.500
Suiwotin 2pcs Multimeter Test Leads, Electrical Meter Test Leads Probe, Right Angle Banana Plug, CAT III 1000V 10A Digital Multimeters Cables (Black, Red)
KWD 3.500
