The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50KHz-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.
We add Sma to Bnc connector for testing Bnc connector. We add one uhf antenna and one vhf antenna for comparing.
Upgraded: We add a 8G sd card to save the image, you can save results and upload to PC for further analyze.
Description
NanoVNA 10KHz-1500MHz Vector Network Analyzer Kit MF HF VHF UHF Antenna Analyzer
All is new. Firmware is upgrade to nanovna H version.
We add sma to bnc connector for testing Bnc antenna.
We add uhf and vhf antenna for comparing.
1. PCB: 54mm x 85.5mm x 11mm
2. Measurement Frequency: 10KHz ~ 1500MHz
3. RF output: -13dbm (maximum -9dbm)
4. Measurement range: 70dB (50kHz-300MHz), 60dB (300M-600MHz), 50dB (600M-900MHz) enable extended firmware);
5. Port SWR:
6. Display: 2.8 inch TFT (320 x240)
7. USB interface: USB type-C communication mode: CDC (serial)
8. Power: USB 5V 120mA, built-in 650mA-h battery , maximum charging current 0.8A
9. Number of scanning points: 101 (fixed)
10. Display Tracking: 4, Marking: 4, Setting Save: 5
Measuring S parameters, voltage standing wave ratio vswr, phase, delay, Smith chart...
Package Contents:
1x NanoVna H
1x Open Kit
1x Short Kit
1x Load Kit
1x Female to Female kit
1x Bnc Connector
1x Type C Usb cable
2x Male to Male cable
1x Uhf 430Mhz Antenna
1x Vhf 140Mhz Antenna