【Professional&Efficient Brake Fluid Bleeder Exchanger】Brake bleeder is specially used for filling and draining brake fluid of automobile brakes and clutches. Compared with the traditional compressed brake fluid bleeder exchanger, the pulsating electric brake bleeder kit can effectively avoid the generation of air bubbles and the water absorption of brake fluid during the filling process. Brake bleeder is very easy to use and helps you fiil and change your brake fluid easily and efficiently.
【Working Principle of Brake Bleeder Kit】Brake pressure bleeder sucks new brake fluid from the storage tank through the pump and continuously delivers it to the car brake fluid container under the specified pressure. Then the old brake fluid will be discharged in the sequence specified by the vehicle manufacturer for each wheel brake cylinder until the new brake fluid flows out.
【2 Pressure Modes】Brake bleeder kit has 2 pressure modes(Standard mode pressure:1.5-2.0 bar;Fast mode pressure:2.0-2.5 bar) to meet your different needs.Flow rate: 2.6L/min. Brake bleeder is equipped with a pressure gauge, which is convenient for you to observe pressure value of fluid exchange, and pressure can be adjusted freely by adjusting the rotating knob.When working environment is set, all the process of changing the brake fluid will be completed automatically.One person can easily do it.
【Built-in Vacuum Pump&Safe Monitoring&2 Power Supply Modes】Brake bleeder kit has a built-in working pressure pump, no need for an external vacuum pump. It also has a built-in pressure monitoring device. If pressure cannot be built up or the pump sucks in air, the pump will automatically shut down, preventing air from being injected into the vehicle brake fluid reservoir. Brake bleeder supports 12V battery power supply or 110V/220V power supply, allowing you to change the brake fluid anywhere.
【Fluid Shortage Protection&7 Master Cylinder Adapters】When the new brake fluid container is empty during filling, vacuum brake bleeder will automatically stop working to prevent air from entering the car brake fluid container. Brake bleeder kit is equipped with a full range of 7 kinds of master cylinder adapters, suitable for most American European, and Asian models, you don't have to worry about model matching. Corrosion-resistant filling bottle is suitable for DOT3, DOT4, DOT5.1 brake fluid.
【3 Years Warranty】We aim at trying our best to offer you the best product and services to make you unworried before/after the purchase. We promise three years warranty. If you have any questions or doubts, our professional technical team will help you solve the problem within 24 hours.
Timing Light 12V Ignition Timing Light Automotive Strong Flash Timing Lights with Sliding Sensor Clip,Long Test Lead, Reverse Polarity Protection, Overload Protection for Car, Motorcycle Petrol Engine
KWD 9.500
-4%
HVAC Gauges 93 Refrigerant Detection Digital Manifold Gauge Set HVAC Pressure&Temp Test HVAC Manifold Upgraded Ball Valve Digital Refrigerant Gauges with 3.5" LCD Display, Refrigerant Hoses,Temp Clips
KWD 63
-19%
Terminal Removal Tool Kit 23PCS Terminal Ejector Kit Non-damage Wiring Harness Depinning Tool, Universal Electrical Connector Pin Removal Tool Kit with High-strength Stainless Steel Tip &Rubber Handle
KWD 15
AC Flush Kit Pressure Regulating&Relief Valve AC Cleaner Real-time Monitoring Pressure Gauge AC Cleaning Kit with Spray Head & Hook & 3.5FT Hose&Fitting for Air Conditioner Pipe, Condenser, Evaporator
KWD 12.500
