Search

Search

Razor E100 Scooter 24 Volt Controller (4 Wire Throttle Connector) with 7 Connectors - for Razor E100 (Version 10+), E125 (V10+), E150 (V1+) , E175 (V18+) Razor Part W13111612015 - Control Module ZK2400-DP-LD-ROHS

KWD 7.500
Brand
Razor
Weight
109 g
– 1 +

Special Features

  • ► Razor Factory Original Replacement 24 Volt Control Module with 7 connectors and 4 pin throttle connector
  • ► COMPATIBLE ONLY WITH: Razor E100 - E125 Versions 10 and up, E150 Version 1 and up, and E175 Version 18 and above
  • ► VERSION SPECIFIC CONTROLLER: This Control Module has 7 connectors (5 plastic connectors & 2 metal connectors).
  • ► IMPORTANT INSTALLATION INFORMATION: The E100 Series Razor Scooter is a PUSH START Scooter. You need to Push the Scooter, Twist the Throttle and then the Motor will Engage
  • ► IMPORTANT PRODUCT INFORMATION: Your E100 / E125 / E150 / E175 Version is determined based on your 8-digit Product Serial ID code. The Serial Number can be found below the Barcode on the battery cover and/or on the bottom of the frame. The last two digits are the version number (e.g. "01"= version 1, "02"= version 2, etc.)

Description

Razor replacement 24 Volt (7 connector) control module for the chain driven Razor E100 & E125 (versions 10+), E150 (version 1+) and E175 (version 18+) Electric Scooters.

Version Specific Controller which has 7 connectors (5 plastic connectors & 2 metal connectors). Throttle connection is 4 wire.

Important Product Installation Information:
Important Product Serial Number Information: Model versions can be determined based on your 8-digit product ID code. The product ID code can be found on the battery cover and/or on the bottom of the frame. The last two digits are the version number (e.g. "01"= version 1, "02"= version 2, etc)

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}