Search

Search

LCR Injection Epoxy Part A Resin and Part B Hardener with 7 Injection Ports for Repair of Concrete Foundation Cracks, Use LCR Repair Paste for Vertical Cracks or Alone on Horizontal Surfaces

KWD 24
Category
Adhesives
Weight
0.5 kg
– 1 +

Special Features

  • Bundle of two items; one 10-Ounce Two-Part Injection Cartridge + one 7-Pack Standard Injection Ports
  • For repair of basement concrete foundation cracks, industrial warehouse floors, patios and sidewalks, balcony, pool and parking decks, reservoir, tank, and pool leaks, lawn ornaments, and paving stones
  • Features excellent adhesion to many other surfaces, including wood, fiberglass, ceramic, and metal; waterproof and resistant to most chemicals
  • No water required to activate; use standard caulking gun at hand pressure only for injection
  • Surface Prep: Remove loose or flaking concrete with a wire brush. Remove dirt, grease, flaking paint, or other contaminants which may affect the adhesion of the epoxy

Description

This Bundle contains two items, one LCR Injection Epoxy Cartridge plus one 7-Pack of Injection Ports explicitly designed for the Polygem LCR system. The LCR Medium Viscosity Epoxy is a 100% solids, two-component liquid epoxy, moisture insensitive, designed to permanently restore structure and design strength to concrete, wood, fiberglass, and metals. The cartridge can be used with any standard caulking gun. Ports are designed to straddle the concrete crack up to 1/8-inch wide. Ports can be adhered to the concrete surface using the 2-part LCR Epoxy Repair Paste. Allow 12-24 hours for curing before injecting the Epoxy. Once the Injection Epoxy has completely cured (48 hours), a permanent bond is established. Note - this is an industrial-quality epoxy product and not an injection foam. It bonds the material being repaired.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}