NanoVna SAA-2N VNA Antenna Analyzer Metal Case, Dearsee 50KHz -3GHz Vector Network Analyzer, HF VHF UHF Measuring S Parameters, Voltage Standing Wave Ratio Smith Chart with 4 inch Display

Upgraded NanoVNA SAA-2N: Not only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier. The 4.0 inch touch screen can flip the display to make it easier for you to read data and test.
Calibration: The SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device.
Frequency Range: Transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
Improved Performance: Made of high-quality aluminum protective case, Strong practicability and long service life. Bulit-in 3000mAh rechargeable battery, USB Powered.
Package: 1x NanoVNA SAA-2N VNA, 1x Micro USB Cable,2x 500mm N-Type Male to Male RG142-PUR RF Cable, 1x N-Type Male Calibration Kit-OPEN, 1x N-Type Male Calibration Kit-SHORT, 1x N-Type Male Calibration Kit-LOAD,1x N-type Female to Female Connector,1x EVA Storage Bag

Hello,