Erie Tools 7/8 in. Hydro Jet Pulsator Valve for Sewer Jetter Machine and High Pressure Water Pump

Turn your pressure washer into a hydro sewer jetter with this accessory. This pulsator valve is designed to reduce the water flow through the center inlet port of the pump. The result is an increase in pulsation on the discharge side of the hose. The valve is operated manually and used in the sewer cleaning industry to assist the operator to move the hose downstream and around sharp corners in pipes. Screw threaded rod clockwise to close the valve and begin pulsating the hose through the pipe.

Specifications:

Erie Tools° Brass Sewer Jetter Pulse Valve Allows Operator to Switch from Pulsating to Full-Flow Modes.

Features:

7/8 in. Standard, Straight threads

Brass Construction

Black Rubber O-Ring to Ensure Proper Water Seal

Black Polypropylene Handle Grip

Remove center pump cap and replace with pulsator valve

Safety Pin to Prevent Operation

Screw threaded bolt in to close the valve and begin pulsating the hose through the pipe