2 in1 design, this product ingeniously integrates digital oscilloscope and multimeter functions into one machine. Equipped with LCD display, with 200MSps sampling rate and 80MHz bandwidth. Multiple measurement design, support measure direct current and alternating current voltage/current, resistance, capacitance, frequency, temperature, diode/duty ratio, triode, waveform, continuity test. 3 scanning modes design of Auto, Normal and Single. With a total of 100 sets of data and 50 waveforms can be saved.

Oscilloscope Parameter:
Analogue bandwidth: 40MHz
Maximum real-time sampling rate: 200Msps
Vertical resolution: 8 bits
Degree of nonlinearity: ±1 bit
Number of channels: 1
Input resistance: About 10MΩ
Division: Vertical 6.0, horizontal 24.0
Ranges of vertical sensativity: 500mV/div ~ 200V/div
Ranges of time base: 12.5ns/div ~ 10s/div
Accuracy of vertical amplitude: ±(5%+ 0.2div)
Accuracy of time base: ±(0.01% + 0.1div)
Automatic zeropoint reference: During direct current measurement
Scanning mode: Auto/normal/single
Trigger level: ± 6 div (0.1div/step)
Selection of trigger gradient: Rising/descending edge
Adjustment of trigger position: ±12 div (0.1div/step)
Automatic setting: Automatic setting of time base and vertical amplitude
Cursor measurement function: dV, dt, 1/dt (Frequency)
Automatic measurement function: Vp-p, Vavg, Vrms
Auto measurement accuracy: ±(5%+ 0.2div)
Length of recording: 24.0div