Facilitate external to internal wire connections with through-panel terminal strips.

Easy Installation
After mounting the terminal strip in your location of choice, wiring is a straightforward task. The internal panel connections are made to the 0.25″ male spade terminals beneath, and the outgoing wire connections are completed on the surface screws, which can accommodate wire up to 12ga. Screw terminal can accommodate connector with ring / fork diameter up to 8mm wide.

Functional
The single row barrier strip is fully insulated and should be mounted overtop an appropriate sized cutout.

High-Quality
MGI terminal strips are built to last. Designed to withstand temperatures up to 221F (105°C), with high-quality tin-plated brass terminals and nickel-plated steel screws.

Specifications

Hole-to-hole: 3.375" (8.6cm)
Length: 3.75" (9.5cm) | Height (including pins): 1.5" (3.8cm) | Width: 0.625" (1.6cm)
Pin Pitch: 0.375" (9.525mm)
Wire Range: 22 – 12 AWG
Temperature Rating: -40°C to 105°C (-40°F to 221°F)
Insulation Resistance: 500 MΩ
Withstand Voltage: AC2500/Min
Housing: PA66, UL-94V-0
Rated Voltage/Amps: 300V / 20A
Terminals: Brass, Tin-plated
Screws: Steel, Nickel-plated M3.5
Torque: 0.5 N*m, 7.0 LB*in