Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole. Using M4 nut and C type bracket to seal up the gauge.
For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable.
It takes about 30 seconds to get signal in the first time, but less than 3 seconds after that. It gets quicker under a clear view of the sky. Sometimes if signal is missing, pls. reconnect all wires and restart it.
It shows current speed and course(not odometer and trip meter). If you need black faceplate, pls. search for ASIN B0752WGCGC or B0752SQCMR
Red Backlight, 9-32VDC(12VDC/24VDC) Working Voltage, 1 year Warranty, 100% waterproof and anti-fogging protection
ELING 2" Auto Marine Clock Gauge Meter 12-Hour Format with Backlight 52mm Diameter
KWD 15.500
ELING Waterproof 12V 24V DC Hour Meter Gauge 0-99999.9 H 52mm(2") with Backlight for Car RV Van Boat Motor
KWD 8
-4%
ELING Warranted Digital GPS Speedometer Odometer Kit for Car Boat Motorcycle with Red Backlight 2'' 52mm 12V 24V
KWD 26
ELING Universal 85mm 4 in 1 Multi-Function Gauge Oil Pressure 0-80Psi Fuel Level 0-190ohm 100-250℉ Water Temp 8-16V Voltmeter with Red Backlight (Black+Black)
KWD 26
