Feature:1. Upgraded version, amphibious (inside and outside the tank). Incubate as you like, put it where you want.2. Simple, practical, convenient to shrimp for feeding fish. Easily harvest shrimp without muddy water.3. The process is very simple, easy to operate and use, and high incubation rate.4. Made of premium plastic material, non-toxic and durable. A good and wise choice you should make.5. The suitable temperature is 25-28 degrees, can be used directly in the tank.Specification:Item Type: Shrimp Eggs Hatcher IncubatorMaterial: PlasticWeight: Approx. 238g / 8.4ozHow to use:1. The clean water is aerated first, and then 90Percent aerated treated water is injected into the of the incubator, and then about 10g of coarse salt is added to the water to dissolve in advance.2. Connect the aeration pump to the air inlet at the bottom of the incubator, adjust the air volume to an appropriate size, and the appropriate temperature is 2830Degree C.3. Put in about 35g of brine shrimp eggs and after about 3648 hours (depending on the incubation temperature and the quality of brine shrimp eggs), it can smoothly.4. Collection operation: After the brine shrimp eggs hatch, stop oxygenation and let stand for about 1015 minutes. The brine shrimps to be hatched sink to the bottom and the shrimp shells float, and the brine shrimp larvae can be collected from the bottom of the incubator, and small fish can be fed. .5. Please store uneaten brine shrimp larvae in the refrigerator and freeze.6.The top input of the simple brine shrimp egg incubator is the air supply port. Please adjust the input air volume yourself. If the input air volume is too large or too small, it will affect the hatching time and survival rate of the brine shrimp eggs. Please adjust the input air volume with the air adjustment switch.7. The air