Safety reminder: Do not overfill the lighter, and do not shake the lighter violently to prevent the kerosene from shaking out.

How to use?
1. Turn counterclockwise, open the cap and add kerosene.
2. Put the submachine gun back in place and soak enough oil.
3. Make sure you hold the shaft of the submachine gun at a 45 degree angle to the lighter rod.
4. Gently press and quickly slide the submachine gun along the flint to the steel. Up or down is fine, please be careful not to hurt your fingers.

When to refill and extend/replace the wick?
To ensure the life of the lighter, do not continue to use the lighter when it is low on fluid and should burn for less than 10 seconds.
When the flame becomes weak and the wick is difficult to ignite, it means the wick needs to be refilled and extended/replaced, please follow the steps below.
1. To extend, please use pliers to pull out the wick and stop when the wick is long enough.
2. 2. When replacing the wick, if the wick is too short to wrap around the scraper, you can simply replace it with a new wick.
3. 3. Place the wick back in the middle of the scraper and tap it gently to bring it back to the pipe.
4. 4. The exposed portion of the wick should be at least half the length of the exposed squeegee.

Any improper operation will cause damage to the lighter. When you have any questions about the product or service, please feel free to contact us, thank you.