LUORNG 24PCS 16x29 mm Pinned Nylon Hinges RC Airplane Plane Parts Replacement Aircraft Fixed Wing Model

The square leaf is a foldable nylon hinge, and the two leaves can be folded to an angle of 30 degrees. You can fix the accessories you need on the two sheets to make a foldable structure for larger models.
The overall size after unfolding: length 29mm/1.14in, width 16mm/0.63in; folded size: length 16mm/0.63in, width 15mm/0.59in; diameter of the small hole on the hinge: about 1.3mm/0.05in.
Use: Used for rudder surface connection, whether it is a KT trigger or an EPP/opp/EPS small accessory that needs to be used. It is mainly used for the connection of aileron, rudder and elevator, and the movement of 90 degrees up and down.
Method: When using on a kt aircraft, first make a slot at both ends of the kt board cut, apply hot melt adhesive to the inside, and then insert the hinge in so that it cannot be pulled off. If it is used on a balsa wood aircraft, directly use 502 glue to bond it.
Package content: 24pcs square plane leaflets of fixed-wing model airplanes.

Name: loose leaf (hinge)

Overall size after unfolding: length 29mm/1.14in, width 16mm/0.63in

Folded size: length 16mm/0.63in, width 15mm/0.59in

Hole diameter on the hinge: about 1.3mm/0.05in

Uses: Used for the link of various rudder surfaces (aileron, elevator, rudder, etc.), flexible rotation and convenient link

Quantity: 24

Hello,