Outdoor Light Clips for String Lights
Our outdoor light hooks work great for hanging up your christmas lights, led strip lights, patio lights, a perfect choice for christmas decorations.

Wire Holders for the Wall/Cord Clips for Wall
Our cable wall clips are suitable for wire diameter within 0.3 inch: Christmas lights, LED strip lights, Ethernet Cable, Electric wires, audio cable, cat5, cat6, cat8 cable.

Pre-installed back tape
Use super sticky acrylic transparent backing tape, those adhesive cable clips work great in rainy days and hot sun, remove without any residues and damage.

Large and Strong
Size: 0.75 in*0.75 in*0.47 in, our outdoor light hangers are large and strong, not suitable for very thick extension cord, otherwise the clips may break easily.

Not fall off
R shape design, very small gap, even a thin charger cable will stay in.

STEPS:
1, Clean the mounting surface with alcohol pads, allow it to dry.
2, Remove the backing paper and press firmly for 30 seconds.
3, Please use it after 24 hours for maximum adhesion.

Tips for Better Use
*Do not use these adhesive wire clips on the surface which is wet, textured, dirt or with oil and wax etc.
*Please clean the mounting surface with alcohol pads before you use.
*Please use the car wire clips 24 hours later to allow the glue adhesive better.
*When remove the wire clips for electric wires from the painted wall, it is better to use a hair dryer to heat the backing tape several seconds to avoid pulling off the paint.

Specification:
Name: Adhesive Cable Clips (Large, Clear)
Material: PA66
Size: 0.75 x 0.75 x 0.47 Inch
Color: Clear (transparent)
Suitable Wire Diameter: Within 0.3 Inch