Feature:
1. Due to the high and stable frequency of the DDS, it is also very suitable for the oscilloscope's scan time calibration factor.
2. The output is also suitable for oscilloscope attenuators and probe pulse adjustment.
3. The main output waveform are sine and square‑, triangular , sawtooth .
4. Have a filter (can be turn on/off ) to suit the output of sine and pulse .
5. Small size, multiple functions, simple operation, easy to carry.

Specification:

Condition: 100% Brand New
Item Type: Function Generator
Material: ABS
Color: As shown in the picture
Frequency Range: Sine 1Hz~500kHz (Magnitude is flat up to 200kHz, above 200kHz, the magnitude may drop as frequency increases), other waveforms 1Hz-20kHz with good phase noise and small distortion, if you don't care the phase noise and distortion, it can output full frequency range.
Resolution: 1Hz
Output Waveforms: Sine , , triangular , forward sawtooth , reverse sawtooth .
Sinewave Distortion: 1% (frequency =1kHz)
Output Amplitude: Maximum ±10V(P-P).
Output Impedance: 50 ohm
DC Offset: Maximum ±10V, can be disabled
Internal Filter: For sinewave or pulse, can be turn on/off
Power Supply: DC3.5-10V. DC 5V adaptor or 3.7V Lithium battery is recommended.
Weight: Approx.172g/6.1oz

Package List:
1 x Function Generator
1 x USB Cable
1 x Instruction Manual

Note:
1. Please allow 1‑2cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in&