- Shopping, made easy.
- /
- Get the app!
Connection Delay: 1.5ms.
Light Source: Infrared light 660nm.
Supply Voltage: DC10-30V Impulse (p-p)10% below.
Comsuption Current: 20mA below.
Control Output: 200mA below.
Loop Protection: Reversal connection protection,surge absorption,load short-circuit protection.
Ambient Temperature & Humidity: During operation, Storage: individually-30～＋65℃(no freeze ,no drew ), During operation, Storage: Individually 35-95%RH.
Insulation Impedance: 50MΩ above ( DC500 megameter ) between charging part and housing.
Withstand Voltage: AC1000V 50/60Hz 1min between charging part and housing.
Temperature Influence: Temperature range-30～＋65℃,at + 23℃,± 15% detection distance, Temperature range-25～＋60℃,at +23℃,±10% detection distance.
Voltage Influence: Inside ±15% rated supply voltage range, at rated supply voltage value ,inside ± 10 % detection distance.
Heschen M18 Capacitive Proximity Sensor Switch Non-Shield Type LJC18A3-B-Z/AY Detection 10mm 10-30VDC 200mA PNP Normally Closed(NC) 3 Wires
KWD 4.500
Heschen M30 Capacitive Proximity Sensor Switch, Shield Type, LJC30A3-10-Z/CY, Detection 1-10mm, 10-30VDC 200mA, PNP NO+NC, 4 Wire
KWD 5
M18 Capacitive Proximity Sensor Switch Shield Type LJC18A3-5-J/DZ Detection 1-5mm 90-250VAC 400mA Normally Closed(NC) 2 Wires
KWD 4.500
M12 Inductive Proximity Sensor Switch Shield Type LJ12A3-2-Z/DX Detector 2mm 10-30VDC 200mA Normally Closed(NC) 2 Wire
KWD 2.500
