The BHA 15" Buffing Wheel Rake features a 4-1/2" long x 2" wide steel rake plate with 4 sets of teeth attached to an ergonomically designed double handle wooden shaft. This rake is designed to remove residual buffing compound from the buffing wheels to prolong each buffs useful life and maintaining consistent buffing action. You should use this buffing rake when too much compound is applied or the compound has hardened on the edges. To use this buffing rake simply run the polisher, pedestal grinder, or lathe at normal speed and carefully allow the rakes teeth to make contact with the spinning buff. This rake can be held with both hands simultaneously for reduced operator fatigue and maximum safety.