Remote Control IR Blaster/IR Emitter for Repeater Extender Systems Why use a Stick-on emitter When You can use a Blaster and Cover Multiple Devices. This Blaster Works with Our IR Repeater Kits.

Full Frequency coverage - 20KHz to 60KHz. This Blaster has you covered for the latest in IR technologies. If you have one of our IR Remote Extenders or other IR Extenders available.
TECHNICAL DETAILS - Tip is Signal & Ring is Gnd. Angle is 180 Degrees. Transmission Range up to 3ft - Compared to standard emitter that is only 3 inches - Cable Length 6 ft. -Wavelength- 940nm
Please check your system of IR extender / IR receiver for compatibility. You should be able to find compatible information in your manual. Rest assured they work on systems from HDTVHookup
No need to stick this on the device you are trying to control, just attach it in the cabinet or place it under 1 device sticking out a bit and it will blast and flood everything around with IR
Control devices like Cable Boxes, Set top Boxes Home Theater and others. Non-Visible, High Output: Emits only infrared light, invisible to the naked eye. Reliable signal transmission to AV components.

Hello,