MAIN SPECIFICATIONS AND TECHNICAL DATA - Shopcorp Switch Control Box offers a double (2) hole push button with a 22mm button hole size and a screw hole diameter of 4mm. Surface mounted, waterproof sealed plastic electrical enclose push button box. The XB2-B01 empty plastic control station with 1 opening in 1 column is part of the XB2 range offered by Shopcorp. No batteries required.
WORKING CONDITION - Max Current: 10A; Max Voltage: 220V; Interface: Momentary Pushbuttons; Number of Buttons: 2; Contact Operation: 1NO/1NC; 1-Row vertical; Material: Polymeric (Plastic); Use With: Stainless Steel Lid Mounting Screws. Ambient temperature: between -25°C and 55°C; Protection Level: IP65; Certificate: CCC CE.
VERSATILITY - The push button switch control box can be used in a control station in order to protect the push button switch. Suitable for industrial control equipment circuits for controlling electromagnetic starters, contactors, relays and other circuits (there are only boxes in here, button switches are not included). Good for electronic projects, power supply units, amplifiers, etc. Suitable for emergency stop rotary switch.
INSTALLATION - Plastic boxes like Shopcorp Switch Control Box are most common and should be used with non-metallic cable wiring. This double-gang box is intended to hold one electrical device, like a switch or a receptacle. Plastic electrical boxes have their pluses and minuses. Because they are plastic, there is no need to attach a ground wire to it. Since it is made of a non-conductive material, switches and outlets cannot short out if they touch the side of the box.
STABLE WORKING PERFORMANCE - Better waterproof and anti-corrosion performance. Protect your instruments even under adverse conditions. Its main material, ABS or Acrylonitrile butadiene styrene, is a great plastic product to use since it is one of the most durable, and impact resistant. It is also relatively harmless since the plastic material doesn't contain any known toxic carcinogens.
Description
SPECIFICATIONSProduct name: Push Button Switch Control Station BoxModel: JL-BX1Style: 2 PositionNumber of Buttons: 1Switch type: Push Button SwitchMounting hole: 22mmScrew hole diameter: 4mmOperation type: Maintained (Latching)Max Current: 10AMax Voltage: 220VInterface: Momentary PushbuttonsContact Operation: 1NO (1 Green flush push button) or 1NC (1 Red flush push button), 1-Row verticalMaterial: Polymeric (Plastic)Use With: Stainless steel lid mounting screwsAmbient temperature: between -25°C and 55°CProtection Level: IP65Certificate: CCC CETerminal Quantity: Silver pointColor: Black and white
DaierTek LED Indicator Light 12V Waterproof Red Signal Light Waterproof 6MM 1/4" Metal 12 Volt Panel LED Indicator Signal Light Panel Mount Flat Head with Wires Silver Shell -3Pcs
KWD 3.500
Signaworks LED 3 Light Steady Andon Tower Light Kit - Parts Only, Assembly Required - 2 Position Switches for On/Off - Stack Light…
KWD 59
3 Pole Contactor 30 amp Normally Open IEC 660V Contactor Switch, Auxiliary 1NO/1NC - 110/120V Coil, Motor Load 32A, Lighting 40A, 50A - AC Contactor | Includes DIN Rail and Phillips Screws
KWD 19
-3%
3 pole contactor 120v coil 30 Amp Normally Open IEC 660V Contactor Switch, Auxiliary 1NO/1NC –110-120VAC Coil, Lighting AC Contactor with Mounting Base for DIN Rail - 1 Pack
KWD 15.500
