"
Pipe fittings are the components in the pipeline system that play the roles of connection, control, reversal, diversion, sealing, and support.
Note that the brass Hose Barb Fitting are US NPT standard threads with a 60 degree taper.

Product introduction：
1. The barbed end is used to connect hoses of the same inner diameter, and the Hose Clamp creates a tight seal between the barbed end and the hose. NPT female and male threads are hard connected and do not require sealing in most cases.
2. It is suitable for most gases, water, oils and corrosive liquids. Can be used with PVC, PU, rubber hose or tubing. Widely used in grease, fuel, refrigeration, water, instrumentation, oil and gas and hydraulic systems.
3. 90° angle to change direction of flow between pipes.
4. The threads are smooth and clear, easy to install, and a sufficient number of threads are designed to ensure that the joint is stronger after tightening and prevent loosening. To ensure a seal, Teflon tape can be used, just wrap a few turns around the threads.
5. When purchasing pipe fittings, consider the application as this will affect the material type, shape, size and desired durability. Fittings are threaded or unthreaded and come in many shapes, styles, sizes and schedules (wall thickness)

PACKAGE INCLUDED:
3 x 3/8" Barb x 1/2" MNPT 90 Degree Elbow Hose Barb Fittings
3 x Hose Clamp
1 x Teflon tape
"