2PC 3/4" Elbow Air Piping Fittings, 3/4" Tubing x 3/4" Tubing, Brass-Nickel Plated, 200PSI, Air Tubing Fittings For Shop Garage Compressed Air line System Kit
All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
These 3/4'' Tubing x 3/4'' Tubing elbow fittings for air piping employ a compression-style design, facilitating quick and effortless connections.
Material: Crafted from nickel-plated brass, these elbow fittings ensure durability and corrosion resistance.
Sealing: Featuring a double O-ring compression style fitting, no glue, soldering, or crimping is required, allowing for easy removal of tubing if necessary.
Size: Designed for 3/4-inch air piping, these elbow fittings maintain a 3/4-inch size and can withstand a working pressure of 200PSI.
Easy Installation: Begin by beveling the inside of the tubing using the reaming tool and rotating it. Then, remove nuts and split rings from the fittings and place them on the tubing. Next, push the fitting onto the tubing until it is fully against the shoulder of the fitting. Turn the nut finger tight, and mark it along with the fitting body for reference. Finally, tighten the nut with a wrench for a minimum of 3/4 of a turn or until secure."
1/2" NPT Combination Pilot Valve, Unloader Valve, Check Valve plus Throttle Control Cable for 8HP - 13 HP Gas air Compressors and Below (095-125 PSI, 12" Throttle Control Cable & Unloader Valve)
KWD 34
Air Compressor Drain Valve Air Compressor Replacement Parts Central Pneumatic,Air Compressor Valve Plate Metal Part Accessory Replacement Set 3/8in 48x72mm 1P2.5P3P4P
KWD 4
-6%
Piston Driver 885-667 Replacement Hitachi NT65M2 Driver Assembly
KWD 7.500
-11%
Teknor Apex 8845-50 NeverKink Pro Commercial-Duty Hose - 5/8" x 50'
KWD 12
