Specification:
Item Type: Immobilizer Bypass Module
Material: ABS
Power Supply Voltage: 12 (V)
Working Temperature: -20-80 (℃)
Application: Suitable for 12V cars
Description:
When the modified vehicle has a chip inside the remote control, the original car computer will detect the chip data in the car key at the moment the vehicle is started. If the data is correct, the ignition can be started successfully, otherwise it will not start. (For home use: You can put the original car remote control or the chip inside the original car key into the avoider box, and transmit the chip signal data to the coil of the original car key ignition lock through the induction coil)
How to install the bypass module?(Please note a spare key is required to go inside the Box, if your original key is too big, please open it to get the chip unit )
Some cars have car key (chip key), if you want to remote start car, you need to have a bypass module, otherwise the car engine can't started.

How to Use:
1) Remove the key screws of bypass module control box, open the control box;
2) Insert the OEM car key or key PCB or Key chip under the wire;
3) Lock the locker and press the wires close to the remote key, or key PCB or Key chip;
4) Tighten the screws and lock the case;
5) Circles the sensing the wire on the OEM car key socket(circle more circles can enhance the signal;
6) Fasten the sensing wires to the car key socket with glue;
7) Try to start car engine to confirm the bypass module working, if it is not working, please try circle sensing wire more circles on the car key socket, or check the connection if it is right;
8) Place the bypass module in a place.

Package List:
1 x Control Box
1 Bundle of Cable
1 x Induction Coil
1 x Adhesive Stickers
1 x Manual

Note:
1. It is a bypass module to release the chip key. Please note that it is not a remote start button.