Works for front and rear mounted motors, both on left and right side as needed.
Made from 3mm stainless steel, the arm strong and is firmly held in place by the arm to a threaded M5 eyelet on the frame/fork.
Flexible splined insert concept that allows 50 angles of orientation so you can easily position the arm parallel to a frame/fork component.
Splined-inserts are included for 12 and 14mm axles.
Splined inserts made from hardened 17-4 for up to double the spinout strength compared to most regular stainless steels.
Use this Torque Arm when threaded eyelets are available on the frame to anchor the arm on. If eyelets are not available, we recommend our TorqArm V6.
All torque arm parts proudly made in Canada.
Description
Grin Technologies Universal FRONT and REAR Ebike Torque Arm,12mm and 14mm Axles with threaded eyelet near axle. Made in Canada. FAQ: Q: Is one torque arm enough, or should I use two? A: One is almost always more sufficient. Installing a 2nd torque arm will be tricky if you have a hub where the cable exits the end of the axle, as you'll need to cut the connectors off the wire and then reattach them. If you are using a 3rd party torque arm that is made from thinner 1/8" (3mm) metal plate, then we'd recommend doubling up and installing 2 arms. Q: Does it matter if I have 12mm or 14mm axles? A: No it does not matter, the torque arm plates are sized to accommodate a 14mm and 12mm Axles..
