Search

Search

-15%

FYSETC 3D Printer Kobra2 Hotend Accessory - Any Cubic 24V 65W Print Head Replacement - V5 J-Head Extruder Part: Hot End Kit with Volcan Nozzle Heater Cartridge Thermistor for Filament PLA PETG ABS

KWD 5.500
Brand
FYSETC
Weight
38 g
– 1 +

Special Features

  • 1. Kobra2 Series Hotend Replacement: This print head kit replacement is only compatible with Any cubic Kobra2 / Kobra2 Neo / Kobra2 Pro / Kobra2 Plus / Kobra2 Max FDM 3D printer. (NOT with Kobra-Plus, Kobra-Max, Kobra-Go, Kobrra, Kobra-Neo or Mega, Mega S, Vyperr, Chiiron or Elego Netune3 Pro, Neptune4, Neptune4 Plus).
  • 2. Package Included: 1 set hotend kit, assembled with 24V 65W heating rod element, thermistor, heat block, heatbreak throat tube, any cubic kobra2 nozzle, tef-lon filament tube and black 3d printer silicone sock). Faster heating speed than other 40w hot end kit.
  • 3.Filament Compatibility: This Kobra2 hotend works great with 1.75mm PLA/ABS/WOOD/PETG/TPU 3d printing material. Support≤ 500 °F / 260 °C. This print head is a special VolcanoNozzle design which has a larger contact area to melt the filament faster for high-speed print. The interior of the nozzle is smooth without burry, which not only reduces air resistance and prevents the filament from jamming, but supports high-speed printing. We have this nozzle(5pcs/pack) at our store, Asin:B0CQF668R6.
  • 4. Simple Installation: Loosen the old hot end with the M2.5 M2.0 hex key to remove the housing cooling fan wiring and install the new hotend (Heating tube, thermistor, nozzle etc are pre-installed). After installation, please level your kobra2 with LeviQ2.0 Auto-leveling System to secure the distance between the nozzle and 230x230mm PEI magletic spring steel sheet. Then start your 3d printing project.
  • 5.High Quality Material: With the original high-accurate Volcanoo 0.4mm brass nozzle to keep the print head heats evenly, secured thermistor and tef-lon pipe lining, it can provide smoother printing with less clogging. Quality silicone sock with high-temperature resistance and good thermal conductivity.

Description

FYSETC Kobra2 series 3D Printer Hotend Kit Hot End Print Head Accessories Extruder Replacement for Any cubic Kobra2/Kobra2 Neo/Kobra2 Pro/Kobra2 Plus/Kobra2 Max Printer with Silicone Sock 0.4 mm Vollcano Brass Nozzle Heatbreak Heater Cartridge Thermistor etc (1 Set Assembled)

Specification:
Material: Aluminum + Stainless Steel + Brass
VolcanoDesign: 0.4mm nozzle for 1.75 mm filament, High Speed nozzle for High Speed Printing
Filament material: 1.75mm with PLA/ABS/PETG/TPU/Wood
Heating rod size: 24V 65W, OD6X20mm, cable length with terminal about 85mm.
Thermistor: OD3x5mm, NTC 100K 3950, can reach up to 300℃ for long time working
Operating temperature range: -40~+260°C (-40~+500°F)
Simple Installation: Remove the old hotend kit and replace the new one, then adjust your z-offset.
3D Printer hotend for Kobra2 series: Anycubicc Kobra2 - Kobra2 Neo - Kobra2 Pro - Kobra2 Plus - Kobra2 Max

Package Include:
1 X V5 J head Hotend Kit for Any cubic Kobra2 direct extruder

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}