✅【Valuable Benefits】Locks the flywheel in place during the removal of the harmonic balancer for 6.6L Duramax engines equipped with Allison automatic transmissions, reducing time compared to removing the starter for water pump replacement.
✅【2500 & 3500 Flywheel Holder】Designed for use with Duramax 2500/3500 pickups. Install the toothed pieces by removing the metal spring-loaded inspection plate located on the bottom of the transmission. Slide the tool into the opening toward the engine, ensuring the top of the tool engages with the teeth of the flywheel.
✅【4500 & 5500 Flywheel Holder】Intended for use with Duramax 4500/5500 trucks. Install the toothed pieces with screws after removing the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage with the flywheel, then hand-tighten the bolt to secure the tool in place.
✅【36mm Socket】Utilize a 36mm 12-point socket with a 3/4 square drive to remove and re-torque the harmonic balancer bolt during installation. This socket can also be employed for axle maintenance tasks.
✅【Dedicated After-sales Support】For superior after-sales service, ensure your 22100 Flywheel Locking Tool is purchased from "Sold by Rogierra". If you encounter any issues, please reach out to us via "Order History" - "Contact Seller" for a prompt refund or replacement set. Your satisfaction is our utmost priority.
Extra Long Precision Hook and Pick Set, 6-Piece Set, Chrome Vanadium Steel Shaft, for Remove Hoses and Gaskets, Auto and Electronics maintenance tools
KWD 4.500
LIBRATON Flaring Tool, HVAC Flaring Tool Kit, Copper Flaring Tool, 45° Eccentric Single Flare Tool for 1/4''-3/4'' and 6-19mm with Pipe Cutter, Deburring Tool for Copper Aluminum Pipe
KWD 38
-21%
GEARWRENCH 2 or 3 Jaw Internal/External Puller, 2 Ton - 3561
KWD 18.500
Ken-Tool 35630 20'' 4-Way Lug Wrench (Color may Vary)
KWD 10
