#12 Stainless Steel NO PAINT 12 x 1-1/2 Inch Long Sheet Metal Roofing Screws

- 1/4" Hex Head - 5/8" EPDM Washer - Shank Diameter 0.221" - Width 0.625" - Height 0.195
- Self-Piercing screws are designed to push through pre-drilled sheet metal panels
- Stainless Steel screws are ultimate in corrosion resistance in high humidity areas - no corrosion
- Stainless Steel Screws are backed by a 50 Year Manufacturer Warranty against manufacturing defects
- These screws are great sheet metal roofing screws to use on any metal roofing or siding project
- Rough Estimation - Regular Roofing Project Should Require 80 Screws per 10' x 10' Section of Roofing

Depending on the application and personal preference, No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal. Generally buying galvanized coated screws is a great way to purchase a long lasting but low cost roofing screw

12 x 1-1/2 Stainless Steel NO PAINT Sheet Metal Roofing Screws
All our metal roofing screws use EPDM Washers to seal the screw to metal roofing panel to stop leaking. Our metal roofing screws EPDM washers hold up well to ozone, temperature extremes, ultraviolet radiation, and other harsh outdoor environmental conditions. The EPDM Washer is Bonded to a Galvanized Steel Washer Prevent Sealing Issues Due to Fluctuating Temperature Ranges. Compared to Neoprene Washers, the EPDM Temperature range of -60 to 350 F is Far Superior to Neoprene washers which have a much narrower temperature range

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended