Widely applicable: PVC heat shrink wrap tube can be used for big battery or battery pack protection, such as 18650, 21700, 26650, AA, AAA battery packs. Battery wraps can be used for protection for batteries pack, electronic components, LED pins, etc. PVC heat shrinkable tube can also be used for DIY of various handle tools in daily life, more convenient and fast.
The PVC heat shrink wrap tube is in size of: 150mm(6-inch) flat width, 10 Feet total length, -40°C to +105°C(-40°F to +221°F) temperature range, 80°C(176°F) shrinking temperature. Shrinkage Rate: 48% (cross-section), 5% (longitudinal).
Excellent insulation performance: PVC heat shrink tubing has good electrical insulation performance, which can effectively isolate the electrical connection between the battery and the external environment, avoiding safety risks caused by electrical problems such as short circuits in the battery. can not only wrap and protect the battery pack, prevent dust for the battery pack, but also beautify the battery pack. also be used for the protection of electronic components, and LED pins.
Excellent weather resistance, wear resistance and corrosion resistance：PVC heat shrink tubing has extremely strong weather resistance and can maintain stable performance in various harsh environments such as high temperature, low temperature, and humidity, ensuring that the battery can work safely and stably under various environmental conditions.PVC heat shrink tubing can resist the friction and collision that may occur during battery use, reducing the risk of battery damage. At the same time, it also has excellent chemical corrosion resistance, which can effectively resist the erosion of various chemical substances and protect the safety of the battery.
Easy To Install:: The installation process of PVC heat shrink tubing is simple, and it can be shrunk and wrapped around the battery by heating, without the need for complex operations, greatly improving work efficiency.1.Prepare heat shrink tube, cut it to the length you want ; 2.Put battery in the heat shrink tube ; 3.Shrink with heat gun.
Description
Material: PVC Heat Shrinkable;
Size: 100mm(3.9in) Wide/150mm(5.9in) Wide/200mm(7.9in) Wide, 3M(9.9ft) Length, Thickness is 0.15mm;
Shrinkage Temperature: 90-110(℃); Shrinkage Rate: 48% (cross-section), 5% (longitudinal);
Advantages: Insulation Protection, Fast Shrinkage, Multiple Applications;
Application: used for 18650 21700 26650 Lithium Battery DIY Battery Pack and enhance electrical insulation.
Steps of installation:1.Prepare heat shrink tube, cut it to the length you want ; 2.Put battery in the heat shrink tube ; 3.Shrink with heat gun
Notice: heat gun is usually used as heating tool. When using the heat gun to heat, pay attention to move back and forth to make the heat shrink tube heated as a whole.
Clear PC Pipe Long Polycarbonate Round Rigid Plastic Tubing Unbreakable Plastic Tube Clear Tube for Dust Collection Hose Fittings (4 x 36 Inch)
KWD 14
Eoiips 1/4" OD 304 Stainless Steel Tube, Thickened 304 Stainless Steel Seamless Tubing Round Metal Pipe, 13.7" Length Industrial Metal Straight Tube, 4Pcs
KWD 6
100 ft Latex Rubber Tubing 3/8 inch OD 1/4 inch ID Multicolor Natural Latex Tube Surgical Tubing Sling Rubber Band Fitness Hose, 1 Continuous Piece (Black)
KWD 10
-20%
uxcell a13052800ux0615 600V 25A Double Rows 12P 12 Positions Covered Barrier Screw Terminal Block
KWD 4
