Quick Overview: X-cide is the newest technology in odor removal, integrates the science of chemical absorption, pairing, modification, and encapsulation to safely and permanently eliminate odors without leaving objectionable fragrance or sticky residue behind. Features: For strong embed odors (Urine, vomit, feces): Prepare a dilute solution of 1 part X-cide concentrate to 8-16 parts water. Flood the contaminated area sufficiently to soak the surface and liberally penetrate into all sub surfaces where the odor may have migrated. Allow a 10 minute dwell time then vacuum away excess solution from the area. If possible allow area to dry before cleaning. Odors should be gone within minutes. If odor remains it is because X-cide has not been in contact with all the contamination. Important Note: If cleaning must be performed at the time of treatment, apply the X-cide to the dry carpet prior to any cleaning and remoisten surface fibers with X-cide after the cleaning. For surface odors: Prepare a dilute solution of 1 part X-cide concentrate to 16 parts water. Spray apply this solution to wet out the contaminated area and allow the area to dry. A ULV fogger may be used for this application… when using this method of application wear an NIOSH approved organic vapor respirator during the process. Pet bed, upholstery, & mattresses odors. X-cide is an excellent treatment to eliminate odors from pet beds, upholstery or mattress odors. Prepare a solution of 1 part X-cide to 16 parts water. Using a trigger sprayer, mist the surface of the fabric and brush gently to improve penetration. Allow to dry before using. General malodor of carpet, pet runs etc. To eliminate pet body odors from carpets, automobiles, pet runs, etc. Prepare a solution of 4 oz. X-cide concentrate per 1 gal. water. Use a pump type sprayer to evenly apply the solution. Allow area to dry before using.