40 Amp 4 Pole Normally Closed (NC) General Purpose Contactor for home and industrial uses, with power status indicator. Works for 15 Amp, 30 Amp and 32 Amp loads. Complies with IEC/EN standards for consistent and reliable installation. Includes DIN Rail made of steel zinc and two (2) 18-8 stainless steel #10 Phillips drive, truss head screws. Contactor has applications for lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters; and AC-3 for air conditioners, compressors or fans. With an energy saving, silent and no humming coil. Contactor Specifications Contactor IEC 400VContactor Type NCFull Load Amps-Inductive 20Full Load Amps-Resistive 40DC Load: 30A, @ 24VDCPower status indicatorNumber of Poles 4Coil Volts: 110/120VAC, 50/60 HzCoil Load: Inrush 30VA, Sealed 4VAIEC AC Rate: AC-1, 10 kW. AC-3, 8 kWElectric e strength: 4 kVOperating Temperature: -30…+70 °C (-22…+158 °F)1 HP @ 1 Phase - 120V2 HP @ 1 Phase - 230V5 HP @ 3 Phase - 208V5 HP @ 3 Phase - 230V10HP @ 3 Phase - 480VWeight: 0.88 lb (0.42 kg) CE approved 61095, UL pendingBase or DIN 35mm mountWiring:Solid Conductor: 25 mm2 Max torque 0.6 NmStranding Conductor: 16 mm2, Max torque 0.6 NmCompliance:EN 60947-4-1, EN 60947-5-1, IEC 947-2, IEC 60947-4-1, IEC 60947-5-1, VDE 0660 DIN Rail Specifications Material: Steel ZincWidth: 35 millimeters (1 3/8 inches)Length: 152.40 millimeters (6 inches)Thickness: 5 millimeters (0.2 inches)Slots: 6Standards: EN/IEC and RoHS