 Package Include : > 1pcs Ratchet Tensioner & Cutter Tool > 100Feet 3/4” Wide S304 Stainless Steel Coil Band with Blue Plastic Tote > 100pcs Steel Ear-Lock Buckles  Ratchet Tensioner&Cutter Tool: > Applicable for steel banding's tensioning, cutting and strapping with width up to 1” and thick up to 1/20”. > Made of Steel with high hardness, thoughness and temperature resistance, anti-rust and fire proof, secure long life. > With rotary design and serrated non-slip ratchet wheel to grip the strap, it easily cuts the tensioned steel band.  S304 Stainless Steel Coil Band : > Material : S304 Stainless Steel > Size : Width 3/4” x Thick 1/16” x Length 100feet > Strength : 1700lb break strength > Anti-Rust, Moisture proof and Fire proof  Steel Buckles : > Width 3/4”, 100pcs > Material : S304 Stainless Steel > Used for 3/4” wide steel banding  The operation steps are as follows: >Step 1: Cut certain length stainless steel coil band, pass coil band through the buckle >and reserve 5cm length. >Step 2 : Bend the reserved 5cm length steel coil band. >Step 3: Put steel coil band on the tube and insert the coil band into the buckle. >Step 4: Using the strapping tensioner clamps the strap and use the handle to tighten it until it reaches the appropriate tightness. >Step 5: Turn over the strapping tensioner tool in reverse direction, then pull down the handle of the blade to cut the steel strap. >Step 6: Hammer the two corners of the steel buckles to complete the installation.