Search

Search

AceCrew Brass Solenoid Valve Viton 3/8 inch NPT 110VAC, 120VAC Normally Closed - flow control valve for gas, air & fluid

KWD 11.500
Brand
Ace Crew
Category
Fittings
Weight
142 g
– 1 +

Special Features

  • AceCrew Industrial grade Electric Solenoid Valve Normally Closed with Viton FKM/FPM seal
  • Size 3/8 inch NPT thread ,Voltage 110VAC , 120VAC
  • Brass inlet & outlet NPT thread , easy to install with 2-way 2-position direct lift diaphragm
  • VAC actuated valve , Normally Closed operation for gas and liquid flow control. Valve will open for flow when energized. Flow rate Cv = 0.71 ; Unidirectional (indication on brass body)
  • Pipe Size : 3/8" NPT Female (18 TP) . Orifice Diameter : 1/5" (5 mm) ;
  • Seal: Viton FKM/FPM, fluorocarbon Diaphragm : Viton (fiber-reinforced) Current : 0.2 Amp . Wattage : 24 Watt. Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
  • Solenoid actuated Valve with Viton seal is suitable for Low viscosity fluid, Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, gasoline
  • Viton FKM seal is better resistant to heat , reducing risks of leaks during operation and ensuring a tight sealing when actuated . Operating Temperature : 15-125 °F (-10~50 °C).To avoid damaging the coil , this valve is not recommended to be in continuous use for more than 8 hours in a single cycle. Media Temperature : 15-250 °F (-10~120 °C)
  • Weight of solenoid valve : 15 oz Solenoid Valves are backed with our 1 Year Warranty

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}