M.2 to PCIe Card

Product Name:
M.2 to PCIe Card (Supports PCIe 4X/8X/16X Interfaces)

Product Description:
This product converts an M.2 NVMe SSD into a PCI-Express 4X, 8X, or 16X interface, providing a high-speed storage solution for your computer.
By connecting the M.2 NVMe SSD to the PCIe slot of the motherboard through this adapter card, you can enhance data storage and reading speeds.

Key Features and Functions:
1.Compatibility: Supports full-length PCI-Express NVMe SSDs in sizes 2230, 2242, 2260, and 2280, ensuring wide applicability.
2.High-Speed Transmission: Supports GEN. 3 PCIe X4 NVMe, delivering high-speed data transmission capabilities.
3.Thermal Performance: Improved design for better heat dissipation, ensuring stable and efficient data processing.

Included Tools and Accessories:
PCI-E 16X (PCIe) to M.2 NVMe SSD expansion card (Note: This product does not include an SSD)
Self-adhesive thermal conductive silicone pad strip to aid in heat dissipation
Screw pack for securing the SSD
Screwdriver for easy installation

Instructions for M.2 to PCIe Card

I. Product Overview
The M.2 to PCIe card allows you to connect an M.2 NVMe SSD to a PCI-Express interface,
enabling high-speed data storage and retrieval by linking your M.2 solid-state drive to the computer's motherboard through a PCIe slot.

II. Installation Steps
1.Preparation:
Ensure that the computer is turned off and disconnected from the power source.
Prepare the M.2 NVMe SSD, M.2 to PCIe card, screwdriver, and screws.
2.Installing the M.2 SSD:
Insert the M.2 NVMe SSD into the slot on the M.2 to PCIe card, ensuring that the SSD's gold contacts are aligned and fully inserted into the slot.
Use the provided screws to secure the SSD to the PCIe card for a stable connection.
3.Installing the PCIe Card:
Open the computer case and locate an available PCIe slot.
Insert the M.2 to PCIe card into the PCIe slot, ensuring that the card's connector aligns with the motherboard's PCIe interface.
Gently but firmly push the PCIe card into the slot until you hear a clicking sound, indicating that the card is securely installed.
4.Connecting Power and Starting the Computer:
Connect the computer's power supply and turn on the computer.
Once in the operating system, check Device Manager to confirm that the M.2 NVMe SSD is properly recognized.

III. Usage Precautions
1.Compatibility Check: Before installation, confirm that your motherboard and operating system support the NVMe protocol and PCIe interface.
2.Cooling Considerations: To ensure good cooling performance, keep the PCIe card and SSD well-ventilated to prevent overheating.
3.Drivers: In some cases, you may need to download and install the latest PCIe drivers from the motherboard manufacturer's official website for optimal performance and compatibility.
4.Data Safety: Set up appropriate backup and recovery strategies in your operating system to prevent data loss.

IV. Troubleshooting
If the PCIe card or SSD is not recognized by the system, try the following steps:
Confirm that the PCIe card and SSD are securely installed.
Check the PCIe slot and SSD for any damage or dirt.
Look for unknown devices or conflicts in Device Manager.
Update or reinstall PCIe drivers.
If the problem persists, contact technical support for further assistance.