Waveshare 4G/3G/2G/GSM/GPRS/GNSS HAT, Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, LTE Cat-4 4G / 3G / 2G Support, GNSS Positioning, Global Band
All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on Onboard CP2102 USB to UART converter, for serial debugging Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports 1.8V/3V SIM card TF card slot for storing data like files, messages, etc. Onboard audio jack and audio decoder for making telephone call
2x LED indicators, easy to monitor the operating status Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baudrate: 9600bps ~ 115200bps Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Modbus POE ETH Relay 8-CH Ethernet Relay Module Supports Sending Modbus RTU/Modbus TCP Protocol Commands via Ethernet Port to Control Relay and Various Devices
KWD 21
Waveshare 2.13inch Touch E-Paper E-Ink Display HAT Compatible with Raspberry Pi Zero/Zero W 250×122 Pixels with ABS Protection Case Supports Partial Refresh
KWD 14
Waveshare USB to CAN Adapter Model A, STM32 Chip Solution, Multiple Working Modes, Multi-System Compatible
KWD 12
Compatible with NVIDIA Jetson Nano Camera IMX219-160 8MP IR-Cut Infrared Night Vision Camera Module for Jetson Nano and Raspberry Pi Compute Module,162° FOV with IMX219 Sensor
KWD 14
