The general purpose buoyancy point level switch provides reliable liquid level detection of relatively clean water and chemical solutions with a 15VA reed switch output. Media examples include boric acid and ultrapure water. The baffle body eliminates level switch chatter caused by turbulence. The submersible polypropylene liquid level sensor is mounted vertically inside the tank as a high level alarm or low level alarm. Float can wire directly to PLC/SCADA or controller. Dynamically stabilized float minimizes the effects of relay chatter. Cage helps protect from debris. Orientation: +/- 20 degree vertical. Accuracy: +/- 2mm in water. Repeatability: +/- 1mm in water. Specific gravity: 0.8 minimum. Contact type: (1) SPDT reed. Contact rating: 15 VA, 0.25A maximum. Contact output: selectable NO/NC. Process temprature: -40 to 176 degree. Pressure: 25 psi (2 bar) at 25 degreeC, derated at 1.667 psi per degreeC above 25 degreeC. Sensor rating: NEMA 6 (IP68). Sensor material: polypropylene. Cable jacket material: polypropylene. Cable type: 3-conductor, shielded. Cable length: 10'. Process mount: 3/4" NPT. Classification: general purpose. Compliance: CE.