What is eSUN High Speed PETG Material?
PETG (Polyethylene Terephthalate Glycol-Modified) is a rigid, tough, high performance material. It has the advantages of high toughness and good mechanical properties (like ABS), also has the characteristics of ease to print and minimum warping (like PLA).
Designed for high speed printers. Fast cooling with high speed printing and comes out with high printing quality. Continues consistently outstanding performance at high speeds.
Optimizing the problem of nozzle adhesion during printing and reduce the printing failure.

8 Available Colors:
Solid Black, Solid Grey, Solid Silver, Solid Green,Solid Blue, Solid Yellow, Fire Engine Red, Solid Orange

Recommended Printing Parameters:
Printing Temperature: 220-260℃ (Recommended Temperature 240℃)
Bed Temperature: 75-90°C
Fan Speed: 100%
Printing Speed: 40-300mm/s
Recommended Heated Build Platform: Textured Paper, PVP Solid Glue

How to Storage:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.

Please Notice:
PETG material is easily stringing after absorbing water, it will be better drying at 65℃ for more than 3 hours before printing.
The picture shown is a representation of the item, color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.