Basic info:
Input voltage: DC 3 to 6 Volt (NEVER go more than 6 volts)
Input current: 2 to 5 Amp
High pressure type: the type of pulse current.
Output voltage: 400kV (Please pay attention to safety)
Arc distance/ High pressure discharge distance range: 1cm - 2cm
The output high voltage wire length: 10cm/ 3.94inch
Input power cord length: 10cm/ 3.94inch (the red wire is positive)

Wiring:
Input Wiring: Red - Positive; Green - Negative
Output Wiring: the other side, same color cable.

Feature:
This high-voltage generator module is based on the principle of Tesla coil.
This small high efficiency module can release high-voltage pulse output with simple external circuit power supply.
Application: Commonly used as 105 high voltage generator, high voltage Igniter.
Application: Ideal for students to study electrical experiment, do science experiment, etc.

Notice:
1. The high-voltage module should not be powered on when it is under high voltage no-load status. (Power must be adjusted to a suitable distance to the high-voltage output line, battery capacity and voltage is proportional to the high voltage arc distance)
2. During the experiment, please test the arc distance from short to long, DO NOT exceed the maximum arc distance, or the high voltage energy might not be released and it may easily damage the module.
3. The input voltage will affect the output voltage and Arc distance.
4. The power of the module is large and the heat dissipation inside is weak. Please let the module work intermittently, continuous work no longer than 1 minute. Improper voltage and long working hours may easily damaged the module.

Package content:
1 piece 3V-6V to 400kV Step-up Power Module Generator