Steel Dragon Tools 13pc. Tungsten Carbide Tipped Annular Cutter Kit 1-3/8" Depth and 1/2 in. to 1-1/16 in.

The Steel Dragon Tools 13-piece carbide-tipped annular cutter kit includes 11 annular bits and two (2) pilot pins. These bits will quickly and safely cut holes in steel. The bits have a 1-3/8-inch cutting depth with a 3/4-inch Weldon shank. Bit sizes included: 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in., 7/8 in., 15/16 in., 1 in., 1-1/8 in., and 1-1/16 in.

Features:

Steel Dragon Tools annular cutters will drill large holes up to ten times faster than regular drills bits.

Machine-finish hole with no reaming needed when using lubricant.

Make overlapping holes, slotting holes, and edge cuts.

Bit size is etched on each cutter.

Pilot pin helps locate center of hole location.

Pilot pin helps eject slug after drilling is complete.

During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.

Specifications:

Kit includes 11 carbide-tipped annular cutters and two (2) pilot pins.

Bit sizes included: 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in., 7/8 in., 15/16 in., 1 in., 1-1/8 in., and 1-1/16 in.

Cutting Depth: 1-3/8 in.

3/4 in. Weldon Shank

Pilot Pin: 1/4 in. x 3-1/2 in. (6.34 mm x 90 mm)

Pilot Pin: 5/16 in. x 3-1/2 in. (7.98 mm x 90 mm)

Includes carrying case.