Search

Search

Ultra-Small GPIO Terminal Block Breakout Board Module for Arduino UNO R3

KWD 8
Brand
OONO
Weight
35 g
– 1 +

Special Features

  • The item has been soldered and assembled. Support for Arduino Uno R3.
  • Terminal block pitch 2.54mm/0.1", wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper.
  • FR-4 fiber glass PCB, dual copper layers.
  • Pin header connect to Arduino board. The breakout board is firmly fixed to Arduino-Uno through standoffs and nut, and will not shake.
  • Packing list: 2x(1 set, A and B each one) terminal block breakout modules, 4x 11mm nylon standoffs. 4x 6mm nylon standoffs. 4x nylon nuts, 1x small slotted screwdriver (NOTE: the item not include Arduino Uno module).

Description

1, The item has been soldered and assembled. Support for Arduino Uno R3.
2, Terminal block pitch 2.54mm/0.1", wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper.
3, FR-4 fiber glass PCB, dual copper layers.
4, Pin header connect to Arduino board. The breakout board is firmly fixed to Arduino-Uno through standoffs and nut, and will not shake.
5, Packing list: 2x(1 set, A and B each one) terminal block breakout modules, 4x 11mm nylon standoffs. 4x 6mm nylon standoffs. 4x nylon nuts, 1x small slotted screwdriver (NOTE: the item not include Arduino Uno module).

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}