Steel Dragon Tools AC2-7PCLG 7PC Annular Cutter Kit Depth 2" Large Sizes 1" - 2" 1 Pin

The Steel Dragon Tools 7-piece high-speed steel annular cutter kit includes six (6) annular bits and one (1) pilot pin. These bits will quickly and safely cut holes in steel. The bits have a 2-inch cutting depth with a 3/4-inch Weldon shank. Also includes carrying case. Bit sizes included: 1 in., 1-1/8 in., 1-1/4 in., 1-1/2 in., 1-3/4 in., 2 in.

Features:

Steel Dragon Tools annular cutters will drill large holes up to ten times faster than regular drills bits.

Machine-finish hole with no reaming needed when using lubricant.

Make overlapping holes, slotting holes, and edge cuts.

Bit size is etched on each cutter.

Pilot pin helps locate center of hole location.

Pilot pin helps eject slug after drilling is complete.

During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.

Specifications:

Kit includes six (6) carbide-tipped annular cutters and one (1) pilot pin.

Bit sizes included: 1 in., 1-1/8 in., 1-1/4 in., 1-1/2 in., 1-3/4 in., 2 in.

Cutting Depth: 2 in.

3/4 in. Weldon Shank

Pilot Pin: 1/4 in. x 4 in. (6.34 mm x 103 mm)

Includes carrying case.